Suspension cleanup (Rear) 27/04/03

As the front came out better than expected I decided to do the rear (mainly due to the fact that my new rear lights and fascia still have not arrived). The same procedure was followed as before.

To look at the method and front results check here.

Near side awaiting cleaning with the heat shield removed.
Just after Painting. As with the front I forgot some masking tape but this time on the drive shaft gaiter.
Rear view after wheels fitted.
Side view, again you can now see the calliper and even the spring. Note I left off the heat shield as it still needed cleaning (stainless steal) and allowed easier access to the turbo bolts for the exhaust replacement.